Blinded by sun at your dinette or losing privacy in your RV bedroom? This small spring kit restores balance in shades 18" to 38" wide, so they roll smoothly and stay where you need them, day or night.
You're sitting in your dinette trying to enjoy dinner when the sun cuts across the table, blinding you. You tug the shade down, hoping for relief, but it won't stay put; it creeps back up or hangs crooked. Maybe it's your bedroom, galley, or hall window. Wherever it is, the problem feels the same. Small shades like these are supposed to block glare during the day and protect your privacy at night, but worn springs or a cracked autostop take that comfort away. Instead of fighting the shade every time the light shifts, you can pull it down once and know it'll stay. This kit includes both parts, so you're covered either way.
Small kits are made for RV shades between 18" and 38" wide. If you're really close to the max width, it won't hurt to go up to the next size. The only limit is the spring size and whether it fits inside your shade's roller tube. These shades need the right spring to roll evenly. So before you order, check the spring inside your shade. If the internal diameter measures 28 mm, this is the right kit. If you have a standard tape measure, that will be about 1-1/8", or a little bigger than the size of a quarter. If it measures closer to 11/16", about the size of a dime, you'll need one of the 17 mm spring kits instead.
Nothing stops a repair faster than missing hardware. This kit includes the spring, clips, screws, and endcaps, so you can fix the problem in one go and get your shade working like new. And all you need is 3 tools: a pair of pliers, a 1/8" Allen wrench, and a flat-head screwdriver.
Alternate Instructions
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this MCD Innovations small spring RV shade repair kit. Now this kit is designed for one small RV window shade. The internal diameter of the springs for this kit is gonna be 28 millimeter. So please measure to ensure accurate spring size.
So you're gonna get everything that you see here. You're going to get one 28 millimeter mini spring, one 28 millimeter auto stop. And then you are going to get four standard clips as you can see here. And then in that bag is also some set screws. And then you're also going to get these end caps.
You're going to get two black end cap sets and two beige end cap sets. This is gonna be for the right and this is going to be for the left. Along with a set of instructions to guide you through that installation process. Now if you happen to have any other additional questions that I did not cover with you during our time together today, don't hesitate to reach back out to us. We here at etrailer.com wanna make sure that you're getting exactly what you want and need.
I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Works like it should. Had to watch MCD video several times to get it adjusted.
Works perfectly!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.